For slow reactions, large-scale mixing patterns in the reactor are important for product distribution. For relatively fast reactions, however, such as reactions with shorter time scales than the mixing time scale, the problems associated with mixing-sensitive reactions are even more complicated because micromixing dictates the product distribution and the selectivity. Fast multiphase reactions occur close to the interface. Therefore, the local mixing environment has the strongest impact. Thus, for fast reactions taking place in liquid–liquid systems, the wake and the mixing behind the individual droplets determines the selectivity and byproduct formation. This article explores the impact of wake dynamics of individual droplets on the product distribution of a fast liquid–liquid reaction. To the best of the authors' knowledge, this is the first paper that addresses this effect.

Background

Although micromixing and its influence on reaction behavior have been studied (15–18), the industrially important case of reactive micromixing in bubble and droplet swarms has received comparatively little attention. During the past five years, our group has investigated the micromixing effects close to individual bubbles and in bubble–droplet swarms (19–22). The main results of our studies have shown that the selectivity and yield of fast chemical reactions are determined by local micromixing—that is, by the local flow pattern around individual bubbles and droplets in a swarm. If the reaction is heterogeneously catalyzed, then the local density of the catalyst close to the bubble is important as well. Thus, for fast liquid–liquid–solid reactions, the liquid and particle flow close to individual droplets determines reactor performance (23).